CategoriesAdsSyndicate This Blog |
Prindle Quick-Release forestay modificationsSunday, September 16. 2012
Attaching the mast forestay shackles on my Prindle 16 takes me a long time. It is also one of the more troubling steps in rigging this boat - somehow the mast has to stay up while I fumble with the shackle and its pin, holding up the bridles and pulling on the forestay turnbuckle. It's not ideal, and it could be improved.
People generally advise against using any sort of quick-release hardware on the forestay, and with good reason. Should it quick-release on its own, you'll have a 26 foot mast coming down on your head, and at best you'll be stranded. Thus I went through West Marine's entire sailboat hardware list 100 items at a time, until I had a solution. Basically, I need something that's quick to attach, but is relatively strong and secure. I am trying to go from this: Original Setup To this: Final Configuration Now, it's quick-release, and it's not as secure as the original shackle, but it is very unlikely to release under tension. As an added safety measure, I use a velcro tie over the pull-pin. Here is how this setup was made: Continue reading "Prindle Quick-Release forestay modifications"
(Page 1 of 1, totaling 1 entries)
'Coffee Bar' design by David Cummins powered by Serendipity |